HIGH COUNTRY GRAVEL | SHIMANO GRX DI2 - DEMO
HIGH COUNTRY GRAVEL | SHIMANO GRX DI2 - DEMO
HIGH COUNTRY GRAVEL | SHIMANO GRX DI2 - DEMO
HIGH COUNTRY GRAVEL | SHIMANO GRX DI2 - DEMO
HIGH COUNTRY GRAVEL | SHIMANO GRX DI2 - DEMO
HIGH COUNTRY GRAVEL | SHIMANO GRX DI2 - DEMO
HIGH COUNTRY GRAVEL | SHIMANO GRX DI2 - DEMO
HIGH COUNTRY GRAVEL | SHIMANO GRX DI2 - DEMO
HIGH COUNTRY GRAVEL | SHIMANO GRX DI2 - DEMO
HIGH COUNTRY GRAVEL | SHIMANO GRX DI2 - DEMO

HIGH COUNTRY GRAVEL | SHIMANO GRX DI2 - DEMO

Regular price $5,500.00 Sale price$3,850.00
/
Shipping calculated at checkout.

Up for grabs...

Size Small Olive-Brown Fade High Country Gravel demo/display bike.

SPECS: 

FRAME SIZE: SM (5'3.5" - 5'8" TALL)

SHIMANO GRX Di2 1X KIT

WHEELS: FSA AGX I25 CARBON

CRANKS: 40T GRX 810 170MM

SHIFTERS/BRAKES: GRX Di2 815/810

R. DERAILLEUR: GRX DI2 RX817 

CASSETTE: M8000 11-42 DEORE XT

ROTORS: SM-RT800 160MM

BOTTOM BRACKET: MT800

CHAIN: HG901

STEM: FSA ACR 70MM

BARS: FSA A-WING AGX 42CM

POST: FSA SL-K SB20 CARBON

SADDLE: WTB GRAVELIER UNISEX 

TIRES: SCHWALBE G-ONE R 700X45

TAPE: FSA POWERTOUCH

BATTERY & CHARGER

EXTRAS: SPARE DERAILLEUR HANGER, SWAG PACK

CONDITION Frame is near mint and drivetrain and wheelset is in like new condition. Tires were moved over from another demo bike that saw dirt action but are in very good condition with lots of tread life left. Bike was used solely as a display bike and for short test rides - on pavement only. There were two small paint chips underneath the driveside chainstay - but they have been touched up and are no longer visible. There are four quarter inch faint scratches on the inside of the driveside chainstay from the chain accidentally rubbing against while removing the rear wheel. They are not noticeable and have been touched up. Aside from that, there are no scratches, dings, etc on the frameset or any part. 

POST DELIVERY ASSEMBLY: Some minor cockpit adjustment/assembly. Installing the front & rear wheels along with the front & rear brake rotors (Centerlock). Plugging in and bolting rear derailleur to hanger. Installing the chain (it is cut to proper length). Plugging in the battery and inserting into seatpost. Lastly and most importantly, final pre-ride bolt check to make certain everything is snug and the bike is safe to ride. 

Note: Tires are set up tubeless with a minimal amount of Stan's sealant to prevent leakage in transit. It would be advisable to add Stan's prior to use. Also, tires may deflate and come unseated during transit and may need to be hit with an air compressor.

BUILD NOTES: Shifting is set up on the right side ("rear") shifter only. That leaves the left ("front") shifter open to a future 2X build and both left side wire junctions are plugged. There is a second Junction B located behind the steerer tube to accommodate and streamline any future modifications or additions that can be accessed by removing the stem and headset top cap. Battery charging port is external and located at the right side bar end.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.